Sargent AL - Alarmed Exit Manual de usuario descargar pdf

Installation and Wiring Instructions for the TL- Prefix

SARGuide Illuminated Touchpad for 80 Series Exit Devices

to ElectroLynx™ Connector System

U.S. Patent No. 7,204,050

For assistance, contact SARGENT at 800-810-WIRE (9473) or www.sargentlock.com

A. Function

The SARGuide exit device contains an illuminated touchpad to enhance the visibility of exit locations in dark or

smoke-filled passages and is intended as a supplement to existing codes for egress lighting.

B. Important

1. Caution: Disconnect all input power before beginning installation to prevent electrical shock and

equipment damage.

2. Installer must be a trained, experienced service person.

3. All wiring must comply with applicable local electrical codes, ordinances and regulations.

C. ElectroLynx Connector System Notes:

The system is designed to be installation friendly with

connectors from the electric hinge through the door to

the rail. The only wiring required is to the loose wires

on the pigtail harness assembly on the frame side of

the electric hinge.

IMPORTANT:

The plug and receptacle connectors are designed to

mate and lock together as shown in the figure. Plug

the connectors into each other with the locking

mechanism aligned as indicated.

Do NOT force connectors on any other way.

SARGuide TL- 80 Series Rail

with 4-pin connector

3 1

1, Violet (-24)

2, Grey (+24)

EXIT EXIT EXIT

D. Installation Notes

1.With new applications, a raceway harness with 8 & 4-pin connectors will be pre-installed inside door by

ASSA ABLOY door manufacturer when specified during ordering process. Raceway harness kits are also

available for retrofit applications. For retrofit applications, refer to retrofit instructions.

2. If door does not have a raceway harness with connectors, either consult factory for raceway retrofit kit, or cut

the connectors off product and hard wire as required.

2. Wiring to pigtail harness is per facility wiring requirement. The rail, raceway, electric hinge and pigtail connector

terminations and wire colors all match.

Reproduction in whole or in part without the express written

permission of SARGENT Manufacturing is prohibited.

A7711C - 5-1-9

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - A7711C - 5-1-9

Installation and Wiring Instructions for the TL- PrefixSARGuide Illuminated Touchpad for 80 Series Exit Devicesto ElectroLynx™ Connector SystemU.S. Pa

Pagina 2

21. Mount exit device per instruction sheet provided.2. TL- (SARGuide) only without other rail wiring requirements - Install 4 to 8-pin patch cable be

Pagina 3

Sample Wiring #1 – TL- Prefix SARGuide and 3532 Power Supplyand Battery Back-upSystem Description:SARGuide is always powered. During apower outage SAR

Pagina 4 - (TL -24)

Sample Wiring #2 – TL- (SARGuide) with 12- 58- (Electric Dogging)combination and 3532 Power Supply with Battery Back-up. 53-,55- wiring if required.Sy

Pagina 5 - (+24), 2

5Sample Wiring #3 – TL- (SARGuide) with 57- (Delayed Egress)combination and 3532 Power Supply with Battery Back-up.Notes:1. TL- SARGuide power require

Pagina 6 - (773-6 ET)

Sample Wiring #4 – TL- Prefix (SARGuide) with Solenoid Exit Trim(ET) and 3532 Power Supply and Battery Back-upSARGuide is always powered. During a pow

Mas documentos para La Seguridad Sargent AL - Alarmed Exit

a Ver el documento Sargent AL - Alarmed Exit Manual de usuario

Sargent AL - Alarmed Exit Manual de usuario (6 paginas)

Comentarios a estos manuales

Sin comentarios

Sargent AL - Alarmed Exit Manual de usuario

Busca en linea o descarga Manual de usuario para La Seguridad Sargent AL - Alarmed Exit. SARGENT AL - Alarmed Exit User Manual Manual de usuario

Indice de contenidos

Mas documentos para La Seguridad Sargent AL - Alarmed Exit

Comentarios a estos manuales

Relacionado con productos y manuales para La Seguridad Sargent AL - Alarmed Exit